Molekula
Agua Tipo I
Type I water
Certificado ISO 9001:2015 e ISO 14001:2015 · Suministro a laboratorios e industria desde el año 2000 · Certificado de Análisis (CoA) con cada lote
Type I water is ultra-pure deionized water, free from ionic contaminants, organic impurities, and particulate matter, used in high-precision applications like analytical chemistry, pharmaceutical manufacturing, and laboratory testing. It meets stringent purity standards (ASTM Type I or equivalent) with a resistivity of 18.2 MΩ·cm at 25°C. Molekula supplies Type I water from research to bulk quantities with full documentation and ISO 9001:2015 traceability.
Resumen
Type I water is ultra-pure deionized water, free from ionic contaminants, organic impurities, and particulate matter, used in high-precision applications like analytical chemistry, pharmaceutical manufacturing, and laboratory testing. It meets stringent purity standards (ASTM Type I or equivalent) with a resistivity of 18.2 MΩ·cm at 25°C. Molekula supplies Type I water from research to bulk quantities with full documentation and ISO 9001:2015 traceability.
Precios y tamaños de envase
Especificaciones
| Property | Value |
|---|---|
| Bacteria | ≤0.1 |
| pH | 6.0 - 8.0 |
| Chlorides | ≤1 ppm |
| Conductivity | ≤0.0555 μS/cm |
| Endotoxin | ≥0.25 EY/ml |
| TOC | ≤50 |
| Silica | ≤3 |
| Sodium (Na) | ≤1 ppm |
| Resistivity MΩ | ≥18 MΩ |
Almacenamiento y manejo
| Property | Value |
|---|---|
| Temperatura de Almacenamiento | Ambient |
| Acidez | Neutral |
Identificación
| Property | Value |
|---|---|
| SKU | 90035519 |
| Número CAS | 7732-18-5 |
| Fórmula molecular | H2O |
| Peso molecular | 18.02 |
| SMILES | O |
| Código REACH | Y113 |
| Incluido en el listado TSCA | Sí |
| Código HTS | 2201.90.0000 |
| Código arancelario | 2853901000 |
Seguridad y GHS
-
Health Hazard
GHS07
Declaraciones de peligro
- H315 Provoca irritación cutánea.
- H319 Provoca irritación ocular grave.
- H335 Puede irritar las vías respiratorias.
Declaraciones de precaución
- P261 Evitar respirar el polvo/el humo/el gas/la niebla/los vapores/el aerosol.
- P264 Lavarse concienzudamente tras la manipulación.
- P271 Utilizar únicamente en exteriores o en un lugar bien ventilado.
- P280 Llevar guantes/prendas/gafas/máscara de protección.
- P302+P352 EN CASO DE CONTACTO CON LA PIEL: Lavar con abundante agua/...
- P304+P340 EN CASO DE INHALACIÓN: Transportar a la persona al aire libre y mantenerla en una posición que le facilite la respiración.
- P305+P351+P338 EN CASO DE CONTACTO CON LOS OJOS: Aclarar cuidadosamente con agua durante varios minutos. Quitar las lentes de contacto, si lleva y resulta fácil. Seguir aclarando.
- P321 Tratamiento específico (ver instrucciones complementarias de primeros auxilios en esta etiqueta)
- P403+P233 Almacenar en un lugar bien ventilado. Mantener el recipiente cerrado herméticamente.
- P405 Guardar bajo llave.
- P501 Eliminar el contenido/el recipiente en...
Documentos
Fichas de Datos de Seguridad (FDS)
Disponible en English, German, Spanish, French, Italian, Portuguese, Arabic, Dutch.
Certificado de Análisis (CoA) por lote
Introduzca un número de lote o partida para recuperar el informe de análisis (CoA) correspondiente a esa partida específica. Podemos generar uno a partir de los datos de especificación si no hay ningún PDF disponible.
Sinónimos
No se han registrado nombres alternativos para este producto.
Preguntas frecuentes
What is Type I water (ultrapure water) commonly used for in laboratories?
Type I water is primarily used for high-purity applications such as HPLC, LC-MS, PCR, and cell culture, where even trace contaminants can interfere with results.
What is the chemical formula and molecular weight of Type I water?
The chemical formula is **H₂O**, and the molecular weight is **18.02 g/mol** (calculated from the atomic weights of hydrogen and oxygen).
How should Type I water be stored to maintain its purity?
Store in a clean, dedicated container at **ambient temperature**, away from direct sunlight, chemicals, or potential sources of contamination.
What purity grade is Molekula’s Type I water certified to?
Molekula’s Type I water meets **ASTM Type I** and **ISO 3696:1987 Grade 1** standards, with resistivity ≥18.2 MΩ·cm at 25°C.
Can Molekula supply Type I water in bulk (e.g., 50L+ containers or via tanker) for industrial or large-scale lab use?
Yes, we offer Type I water in bulk quantities, including **50L carboys, 275L drums, or custom tanker deliveries**, depending on your requirements.
What documentation is provided with a Type I water order?
Each order includes a **Certificate of Analysis (CoA)** detailing resistivity, TOC levels, and microbial testing, along with an **MSDS/SDS** for safety compliance.
¿Listo para realizar un pedido o necesita un paquete personalizado?
Indíquenos el producto, grado y cantidad — Molekula suele responder dentro de un día laboral con precio y plazo de entrega.