IATA/ADR Transport Classifications for Laboratory Chemicals

How is a chemical classified for transport?

Classification is determined by testing or data evaluation against criteria in the UN Recommendations on the Transport of Dangerous Goods. Key parameters include:

• Flash point (for flammable liquids): Measured via closed cup method (e.g., Cleveland Open Cup or Pensky-Martens). A flash point < 60 °C typically triggers Class 3 classification.
• Toxicity: LD₅₀ values (oral, dermal, inhalation) are used to assign Class 6.1. For example, substances with oral LD₅₀ < 50 mg/kg are classified as toxic (6.1).
• Corrosivity: A substance that causes visible necrosis on intact skin after 3 minutes of exposure is classified as corrosive (Class 8).
• Reactivity: Substances that decompose explosively or react violently with water (e.g., sodium, lithium) are classified under Class 4.1 or 4.2.

For laboratory chemicals, classification often relies on existing data from Safety Data Sheets (SDS), manufacturer specifications, or published databases such as the GHS (Globally Harmonised System) classification.

What packaging and labelling requirements apply?

Packaging must meet UN specifications (e.g., UN-certified containers) and be compatible with the chemical’s properties. For example:

• Flammable liquids (Class 3) require UN-certified plastic or metal drums with tight-fitting lids.
• Corrosives (Class 8) must be packaged in corrosion-resistant materials (e.g., HDPE, glass with secondary containment).
• Toxic substances (Class 6.1) require leak-proof, secondary containment and are marked with the skull-and-crossbones symbol.

Labels must include:

• UN number (e.g., UN 1170 for ethanol)
• Proper shipping name (e.g., Ethanol, 95%)
• Hazard class and subsidiary risk (if applicable)
• Pictograms (GHS) and precautionary statements
• Emergency contact number

ADR and IATA require specific label sizes, placement, and durability. For instance, IATA mandates labels to be visible and not obscured during flight.

Are there exemptions for laboratory quantities?

Yes, both IATA and ADR provide exemptions for small quantities used in laboratories. Under IATA, the Limited Quantity (LQ) exemption applies to packages containing ≤ 1 L of liquid or ≤ 1 kg of solid, provided they meet specific packaging and marking requirements. For example, a 500 mL bottle of acetone (UN 1170) may be shipped as LQ if properly packaged and labelled.

ADR includes a similar Limited Quantity provision (ADR 3.4.1.1), allowing transport of small amounts without full documentation, provided the total quantity per vehicle does not exceed 100 L or 100 kg. However, these exemptions do not apply to explosives, radioactive materials, or certain toxic substances.

What documentation is required?

For regulated shipments, the following documents are mandatory:

• Transport Document: Must include UN number, proper shipping name, hazard class, and packing group.
• Safety Data Sheet (SDS): Required for all dangerous goods shipments.
• Emergency Response Information: Available via the emergency contact number on the label.
• Special permits: Required for certain substances (e.g., radioactive materials, controlled substances under TSCA or REACH).

For non-exempt shipments, the consignor must complete a Dangerous Goods Declaration (IATA) or ADR Transport Document.

Frequently asked

• Q: Can I ship ethanol (95%) by air without classification? A: No. Ethanol (UN 1170) is a Class 3 flammable liquid. It may be shipped under Limited Quantity (LQ) if ≤ 1 L and properly packaged.

• Q: What is the flash point threshold for Class 3 classification? A: A flash point below 60 °C triggers Class 3 classification under both IATA and ADR.

• Q: Do I need an SDS for lab chemicals in transit? A: Yes, an SDS is required for all dangerous goods shipments, regardless of quantity.

• Q: Are lithium batteries considered dangerous goods? A: Yes, lithium batteries are classified as Class 9 under both IATA and ADR and require specific packaging and documentation.