Molekula
Poly(ethylene glycol) diacrylate - MW 600 (Contains 100ppm MEHQ and 300ppm BHT to stabilise)
Poly(ethylene glycol) diacrylate - MW 600 is a crosslinking agent used in polymer synthesis, hydrogel formation, and biomedical applications. It is stabilized with 100 ppm MEHQ and 300 ppm BHT to prevent premature polymerization. Available in 10 g, 25 g, and 100 g quantities. CAS: 26570-48-9. Store at 2 to 8 °C. Signal word: Danger. Molekula supplies Poly(ethylene glycol) diacrylate - MW 600 from research to bulk quantities with full documentation and ISO 9001:2015 traceability.
Overview
Poly(ethylene glycol) diacrylate - MW 600 is a crosslinking agent used in polymer synthesis, hydrogel formation, and biomedical applications. It is stabilized with 100 ppm MEHQ and 300 ppm BHT to prevent premature polymerization. Available in 10 g, 25 g, and 100 g quantities. CAS: 26570-48-9. Store at 2 to 8 °C. Signal word: Danger. Molekula supplies Poly(ethylene glycol) diacrylate - MW 600 from research to bulk quantities with full documentation and ISO 9001:2015 traceability.
Specifications
Specifications available on request — see Documents below or contact our sales team.
Storage & handling
| Property | Value |
|---|---|
| Storage Temperature | 2 to 8 °C |
| Shelf Life | 24 months |
Identification
| Property | Value |
|---|---|
| CAS Number | 26570-48-9 |
| Molecular Formula | N/A |
| Molecular Weight | N/A |
| REACH Code | Y110 |
| Tariff Code | 39072011 |
Safety & GHS
-
Corrosive
GHS05
-
Health Hazard
GHS07
Hazard statements
- H315 Causes skin irritation
- H317 May cause an allergic skin reaction
- H318 Causes serious eye damage
Precautionary statements
- P264 Wash thoroughly after handling
- P280 Wear protective gloves/protective clothing/eye protection/face protection
- P305+351+338 IF IN EYES: Rinse with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing
For research and industrial use only
Documents
Certificate of Analysis (CoA) by batch
Enter a lot or batch number to retrieve the CoA for that specific batch. We can generate one from spec data if no PDF is on file.
Pricing & pack sizes
Synonyms
No alternate names recorded for this product.
Frequently asked questions
What is Poly(ethylene glycol) diacrylate - MW 600 used for?
It is primarily used as a crosslinking agent in hydrogel formation, tissue engineering, and 3D bioprinting due to its ability to polymerize under UV light.
What is the chemical formula and molecular weight?
The exact formula and molecular weight are not available, but it is a poly(ethylene glycol) diacrylate with an average molecular weight of 600 g/mol.
How should this product be stored?
Store at 2 to 8 °C in a cool, dark place to prevent premature polymerization.
What grade is available?
This product is available as a stabilized technical grade with 100 ppm MEHQ and 300 ppm BHT to inhibit polymerization.
Can Molekula supply this in bulk?
Yes, Molekula can supply Poly(ethylene glycol) diacrylate - MW 600 in bulk quantities; please contact our sales team for pricing and availability.
What documentation comes with the order?
Each order includes a Certificate of Analysis (CoA) and Safety Data Sheet (SDS); additional documentation can be provided upon request.
Ready to order or need a custom pack?
Tell us the product, grade, and quantity — Molekula usually responds within one working day with pricing and lead time.